Air pre-filter GS-B2 type


Air pre-filter GS-B2 type

所属分类:

Air pre-filter GS-B2 type


  • Cartridge
  • Housing
  • Design and selection instructions
  • 产品链接
    • Commodity name: Air pre-filter GS-B2 type
    • Commodity ID: 994906183279927296

    Air pre-filter GS-B2 type

     
    GS-B2 series gas pre-filter cartridge is made of ultra-fine glass fiber material with highly developed three-dimensional dust holding space. After being folded, the filter element has a greatly increased filtration area and thus has the advantages of high gas flow rate, low pressure drop and large dust holding capacity, etc. It is suitable for filtering out dust, rust and other particulate impurities in dry and oil-free air pressure systems. On the basis of this cartridge, the gas pre-test made of ultra-fine glass fiber using high-range technology fluorine coating technology  , which better meets the hydrophobicity of the filter material and the certainty of the pore type and can play the role of bacterium reduction filtration, effectively protecting the terminal bacterium removal test core and thus extending the life of the terminal bacterium reduction.
     
    ♦ Material Structure
    Filter material Superfine glass fiber, tinted fluorine glass fiber, polypropylene
    Support layer/infusion layer Polypropylene
    Housing/end caps/fins Polypropylene
    Central tube Polypropylene or stainless steel
    O-Ring See cartridge selection table
    Dense Time Technology Adhesive-free heat seal technology

     ♦ Cartridge parameters

      
    Outer diameter φ70
    Length 5"、10"、20"、30"
    Filtration precision(μm) 0.3、0.1
    Effective filtration area 0.4m/10"
    Initial pressure drop (MPa) ≤0.005

    ♦ Operating parameters

    Maximum working temperatureMaximum working temperature
    80
    Maximum working pressure difference Forward: 0.4MPa@25℃
    Sterilization method Online steam sterilizable 123±2℃/30min
    (generally not required)

    Integrity testing See the accompanying product quality assurance sheet 

     
    Main FeaturesMain Features Typical Applications
    High void fraction, high dust holding capacity
    High flux, low pressure drop
    Long life, high temperature resistance, resistance to corrosion
    High filtration efficiency, online disinfection
    Compressed air de-dusting and filtration
    Fermentation process air pre-filtration
    High-precision gas filtration
    De-dusting breather

     

    GS-B1

     

     
    ♦ Ordering Information
      
      GS-B2  Size Filtration accuracy Lower Interface Upper Interface Seals  Type of disinfection
      05=5"
      10=10"
      20=20"
    0030=0.3μm
    0010=0.1μm
    5=226(Outer steel ring lining)
    2=226(Regular)
    P=Plat
    T=Triangular fins
    C=columnar fin tip
    S=Silicone rubber
    E=Ethylene-Propylene
    y=oxygen rubber
    T=Fluoroelastomer
      R = sterilizable
      W=Non-sterilizable

     

  •  
    GS-B2 type folding cartridge air pre-filter

    GS-B2 type folded simple air pre-filter shell is designed, manufactured, inspected and accepted in accordance with GB 150-2011 "Pressure Vessel", and the equipment processing is in accordance with "Steel Pressure Vessel Welding Regulations" JB/T 4709-2007 and in line with "Non-destructive Testing of Pressure-bearing Equipment" JB/T 4730-2016, and the flange standard adopts HG/T 20592-2009 PN series.


    GS-B2 air pre-filter shell import and export are on the same level, with the best air flow design and suspended cartridge insert disc, which has the advantages of low pressure drop and no condensate accumulation. The cartridge socket adopts double honey seal ring 226 snap-in type to ensure reliable sealing and far-filtering effect. The top and bottom of the simple body is flange connected, the material is 304 stainless steel, the inner and outer surface of the shell is treated by mechanical polishing, the conventional working pressure is 0.4MPa, other working pressure shells are also available, and pressure vessel qualification certificate can be provided for more than three core filters.

          GS-B1

     
    GS-B2 air pre-filter outline size and selection table
    Product Model Cartridge configuration Over-reading flux
    Nm²/min
    Dimension(mm)
    D L H h d (import/export)
    GS-B2-05 1×5"   0.5   102 220 380 No legs DN20 PN16
    GS-B2-1   1
    GS-B2-2 1×10"   2 505 DN25 PN16
    GS-B2-3   3 515 DN40 PN16
    GS-B2-4 1×20"   4 765 DN40 PN16
    GS-B2-5 3×10"   5   186 320 750 300 DN50 PN16
    GS-B2-10 3×20"   10 1030 DN65 PN16
    GS-B2-15 4×20"   15   256 400 1115 320 DN80 PN16
    GS-B2-20 5×20" 20 1130 DN100 PN16
    GS-B2-30 7×20" 30
    GS-B2-40 9×20"   40   306 476 1205 350 DN125 PN16
    GS-B2-50 11×20"   50   356 560 1335 440
    GS-B2-60 12×20"   60
    GS-B2-80 15×20" 80   406   600 1380 DN150 PN16
    GS-B2-100 19×20" 100
    GS-B2-120 21×20" 120   456  640 1465 DN200 PN16
    GS-B2-150 24×20" 150   506   700 1550 500 DN250 PN16
    GS-B2-180 27×20" 180 1585
    GS-B2-200 30×20" 200   558   760 1640
    GS-B2-300 36×20"   240   608 860 1780 600 DN300 PN16
    GS-B2-300 45×20"   300   658 920 1865 650
    GS-B2-360 60×20"   360   858 1160 2215 820 DN350 PN16
    GS-B2-400 65×20"   400 2215 DN350 PN16
    Note: 1. Special design and processing can be done according to user requirements; 2. The filtration flux is calculated according to the inlet pressure 0.2MPa (gauge pressure) and differential pressure 0.01MPa.
  •  

  • Fermentation compressed air filtration system (I)

     

    Air compressor picking filter GS-A type

    This series is used for air compressor inlet filtration

     

    Air Master Filter GS-B1

    The cartridge is made of folded fiber filter paper or reinforced glass fiber, which has the advantages of large filtration area, small differential pressure, large flow rate and long life.

     

    Air pre-filter GS-B2

    Made of ultra-fine glass fiber material with 0.3µm filtration accuracy and up to 95% dust holding space.

     

    Steam filter GS-Z

    GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters.

     

    Air Fine Filter GS-PTFE

    Made of natural strong hydrophobic PTFE membrane and borosilicate microfiber compounded by a special process (Invention Patent No. 03129430.8, 200510024216.2)

     

     

     

     

     

    img

上一页

下一页

上一页

下一页

Air pre-filter GS-B2 type


Air pre-filter GS-B2 type

Category:

Air pre-filter GS-B2 type


  • Cartridge
  • Housing
  • Design and selection instructions
  • 产品链接
    • Commodity name: Air pre-filter GS-B2 type
    • Commodity ID: 994906183279927296

    Air pre-filter GS-B2 type

     
    GS-B2 series gas pre-filter cartridge is made of ultra-fine glass fiber material with highly developed three-dimensional dust holding space. After being folded, the filter element has a greatly increased filtration area and thus has the advantages of high gas flow rate, low pressure drop and large dust holding capacity, etc. It is suitable for filtering out dust, rust and other particulate impurities in dry and oil-free air pressure systems. On the basis of this cartridge, the gas pre-test made of ultra-fine glass fiber using high-range technology fluorine coating technology  , which better meets the hydrophobicity of the filter material and the certainty of the pore type and can play the role of bacterium reduction filtration, effectively protecting the terminal bacterium removal test core and thus extending the life of the terminal bacterium reduction.
     
    ♦ Material Structure
    Filter material Superfine glass fiber, tinted fluorine glass fiber, polypropylene
    Support layer/infusion layer Polypropylene
    Housing/end caps/fins Polypropylene
    Central tube Polypropylene or stainless steel
    O-Ring See cartridge selection table
    Dense Time Technology Adhesive-free heat seal technology

     ♦ Cartridge parameters

      
    Outer diameter φ70
    Length 5"、10"、20"、30"
    Filtration precision(μm) 0.3、0.1
    Effective filtration area 0.4m/10"
    Initial pressure drop (MPa) ≤0.005

    ♦ Operating parameters

    Maximum working temperatureMaximum working temperature
    80
    Maximum working pressure difference Forward: 0.4MPa@25℃
    Sterilization method Online steam sterilizable 123±2℃/30min
    (generally not required)

    Integrity testing See the accompanying product quality assurance sheet 

     
    Main FeaturesMain Features Typical Applications
    High void fraction, high dust holding capacity
    High flux, low pressure drop
    Long life, high temperature resistance, resistance to corrosion
    High filtration efficiency, online disinfection
    Compressed air de-dusting and filtration
    Fermentation process air pre-filtration
    High-precision gas filtration
    De-dusting breather

     

    GS-B1

     

     
    ♦ Ordering Information
      
      GS-B2  Size Filtration accuracy Lower Interface Upper Interface Seals  Type of disinfection
      05=5"
      10=10"
      20=20"
    0030=0.3μm
    0010=0.1μm
    5=226(Outer steel ring lining)
    2=226(Regular)
    P=Plat
    T=Triangular fins
    C=columnar fin tip
    S=Silicone rubber
    E=Ethylene-Propylene
    y=oxygen rubber
    T=Fluoroelastomer
      R = sterilizable
      W=Non-sterilizable

     

  •  
    GS-B2 type folding cartridge air pre-filter

    GS-B2 type folded simple air pre-filter shell is designed, manufactured, inspected and accepted in accordance with GB 150-2011 "Pressure Vessel", and the equipment processing is in accordance with "Steel Pressure Vessel Welding Regulations" JB/T 4709-2007 and in line with "Non-destructive Testing of Pressure-bearing Equipment" JB/T 4730-2016, and the flange standard adopts HG/T 20592-2009 PN series.


    GS-B2 air pre-filter shell import and export are on the same level, with the best air flow design and suspended cartridge insert disc, which has the advantages of low pressure drop and no condensate accumulation. The cartridge socket adopts double honey seal ring 226 snap-in type to ensure reliable sealing and far-filtering effect. The top and bottom of the simple body is flange connected, the material is 304 stainless steel, the inner and outer surface of the shell is treated by mechanical polishing, the conventional working pressure is 0.4MPa, other working pressure shells are also available, and pressure vessel qualification certificate can be provided for more than three core filters.

          GS-B1

     
    GS-B2 air pre-filter outline size and selection table
    Product Model Cartridge configuration Over-reading flux
    Nm²/min
    Dimension(mm)
    D L H h d (import/export)
    GS-B2-05 1×5"   0.5   102 220 380 No legs DN20 PN16
    GS-B2-1   1
    GS-B2-2 1×10"   2 505 DN25 PN16
    GS-B2-3   3 515 DN40 PN16
    GS-B2-4 1×20"   4 765 DN40 PN16
    GS-B2-5 3×10"   5   186 320 750 300 DN50 PN16
    GS-B2-10 3×20"   10 1030 DN65 PN16
    GS-B2-15 4×20"   15   256 400 1115 320 DN80 PN16
    GS-B2-20 5×20" 20 1130 DN100 PN16
    GS-B2-30 7×20" 30
    GS-B2-40 9×20"   40   306 476 1205 350 DN125 PN16
    GS-B2-50 11×20"   50   356 560 1335 440
    GS-B2-60 12×20"   60
    GS-B2-80 15×20" 80   406   600 1380 DN150 PN16
    GS-B2-100 19×20" 100
    GS-B2-120 21×20" 120   456  640 1465 DN200 PN16
    GS-B2-150 24×20" 150   506   700 1550 500 DN250 PN16
    GS-B2-180 27×20" 180 1585
    GS-B2-200 30×20" 200   558   760 1640
    GS-B2-300 36×20"   240   608 860 1780 600 DN300 PN16
    GS-B2-300 45×20"   300   658 920 1865 650
    GS-B2-360 60×20"   360   858 1160 2215 820 DN350 PN16
    GS-B2-400 65×20"   400 2215 DN350 PN16
    Note: 1. Special design and processing can be done according to user requirements; 2. The filtration flux is calculated according to the inlet pressure 0.2MPa (gauge pressure) and differential pressure 0.01MPa.
  •  

  • Fermentation compressed air filtration system (I)

     

    Air compressor picking filter GS-A type

    This series is used for air compressor inlet filtration

     

    Air Master Filter GS-B1

    The cartridge is made of folded fiber filter paper or reinforced glass fiber, which has the advantages of large filtration area, small differential pressure, large flow rate and long life.

     

    Air pre-filter GS-B2

    Made of ultra-fine glass fiber material with 0.3µm filtration accuracy and up to 95% dust holding space.

     

    Steam filter GS-Z

    GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters.

     

    Air Fine Filter GS-PTFE

    Made of natural strong hydrophobic PTFE membrane and borosilicate microfiber compounded by a special process (Invention Patent No. 03129430.8, 200510024216.2)

     

     

     

     

     

    img

Pre

Next

Pre

Next