- Products
Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
所属分类：
Liquid pre-filter GS-PP type / GS-PP ZP type / GS-GL type
- Cartridge
- Housing
- Design and selection instructions
- 产品链接
-
- Commodity name: Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
- Commodity ID: 994905591191003136
Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
Ⅰ. Single-layer economical high-flux polypropylene fiber microporous filter membrane folding filter element (GS-PP) seriesGS-PP series pleated filter element is made of a new generation of submicron fiber, which has the characteristics of smaller fiber diameter, large porosity, high particle retention efficiency, high flux and long service life. The all-polypropylene construction provides broad chemical compatibility and can be used to filter a wide range of acids, bases and solvents, making it the most economical prefiltration element.Key features100% pure polypropylene structure
Wide chemical compatibility, pH operating range 1-14
Low differential pressure and long service life
0.1-50μm accuracy can meet the needs of different occasionsTypical applicationsPrefiltration of corrosive liquid filtration, various sterilization filtration
Traditional Chinese medicine oral liquid filtration, process water filtration, reverse osmosis water security filtration
Capture filtration of mineral water, beverages and beer, dust collector filtration
Material structureFilter media: Polypropylene (PP)
Support layer/guide layer: polypropylene
Shell/end cap/fin: polypropylene
Central tube: stainless steel or polypropylene
O-ring: see filter element selection table
Sealing technology: hot melt sealing technology without adhesiveFilter element parametersOuter diameter: Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration accuracy (μm): 0.1, 0.22, 0.45, 1, 3, 5
Effective filtration area: 0.45㎡~0.65㎡/10"Operation parametersMaximum operating temperature: <80°C
Maximum working pressure difference: forward: 4bar@23°C
Reverse: 2bar@23°C
Sterilization method: hot water 85°C/60minOrdering InformationGS-PVDF size Filtration accuracy Lower interface upper interface Sealing rings Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1 = flat press
2=226(regular)
3=222(General)
6=222 (lined steel ring)
7=226(lined steel ring)P = flat head
T = triangular fin
C = columnar wing tipS = silicone rubber
E = EPDM
V = Viton elastomer
T = FluoroelastomerR = disinfectable
W = not sterilizableⅡ、 High efficiency and long life combined polypropylene fiber folding cartridge GS-PP ZP series
GS-PPZp series folded cartridges are made by folding a new generation of submicron polypropylene filter media with multi-layer gradient precision, featuring higher dirt holding capacity, long life and high retention rate. The all-polypropylene structure provides wide chemical compatibility and can be used for filtration of various acids, alkalis and solvents. It can also be customized to meet the characteristics of the actual fluid, such as fluid viscosity, particle content and size, to ensure filtration efficiency and reduce operating costs.
Main features
100% pure polypropylene construction
Wide chemical compatibility, pH range 1-14
High dirt-holding capacity, high filtration efficiency and long service life
Customized to reduce filtration costsTypical Applications
Pre-filtration for fermentation broth filtration, various kinds of sterilization filtration
Pre-filtration of mineral water, beverages and wine
Fine filtration of fructose syrup, fine filtration of beer and pre-filtration of draft beerMaterial Structure
Filter material: combined polypropylene (PP)
Support layer/Infusion layer: Polypropylene
Housing/end cap/fin: polypropylene
Center tube: stainless steel or polypropylene
O-ring: see cartridge selection table
Sealing technology: adhesive-free thermal fusion sealing technologyCartridge parameters
Outer diameter：Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration precision (µm):0.1, 0.22, 0.45, 0.65, 1, 3, 5, 10
Effective filtration area: 0.45㎡～0.6㎡/10"Operating parameters
Maximum working temperature: ＜80℃
Max. working pressure difference: forward: 4bar@23℃
Reverse: 2bar@23℃
Sterilization mode: hot water 85℃/60min
Ordering InformationGS-PP ZP Size Filtration accuracy Lower Interface Upper Interface Seals Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1=Flat press
2=226(regular)
3=222(Regular)
6=222(steel lined ring)
7=226(steel lined ring)P=Plat
T=Triangular fins
C=columnar fin tipS=Silicone rubber
E=Ethylene-Propylene
V=Fluoroelastomer
T=FluoroelastomerR = sterilizable
W=Non-sterilizableHigh dirt holding capacity, long life liquid composite glass fiber prefilter element GS-GL seriesThe new generation of GS-GL series filter element is made of glass fiber and polypropylene composite, with large dirt holding capacity, large filtration flow, large porosity, high particle retention efficiency, large flux and long service life. The composite structure of glass fiber and polypropylene provides a wide range of chemical compatibility and can be used to filter a wide range of acids, bases and solvents, making it the most economical prefilter element.Key featuresGlass fiber and polypropylene structure
Wide chemical compatibility, pH operating range 1-14
Low differential pressure and long service life
0.1-50um accuracy can meet the needs of different occasionsTypical applicationsPrefiltration of corrosive liquid filtration, various sterilization filtration
Process water filtration, reverse osmosis water security filtration
Capture filtration of mineral water, beverages and beer, dust collector filtrationMaterial structureFilter media: glass fiber composite filter media
Support layer/guide layer: polypropylene
Shell/end cap/fin: polypropylene
Central tube: stainless steel or polypropylene
O-ring: see filter element selection table
Sealing technology: hot melt sealing technology without adhesiveFilter element parametersOuter diameter: Φ68.5
Length: 5", 10", 20", 30", 40"
Filtration accuracy (μm): 1, 3, 5, 10
Effective filtration area: ≥0.50㎡/10"
Operation parametersMaximum operating temperature: <80°C
Maximum working pressure difference: forward: 4bar@23°C
Reverse: 2bar@23°COrdering InformationGS-GL size Filtration accuracy Lower interface upper interface Sealing rings Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0300=1.0µm
0300=3.0µm
0500=5.0µm
1000=10µm1 = flat press
2=226(regular)
3=222(General)
6=222 (lined steel ring)
7=226(lined steel ring)P = flat head
T = triangular fin
C = columnar wing tipS = silicone rubber
E = EPDM
V = Viton elastomer
T = FluoroelastomerR = disinfectable
W = not sterilizable -
GS type cartridge liquid filter structure has single bottom opening, single upper and lower opening, upper and lower double opening and removable detachable flower disc base, which can meet the requirements of different filtration processes. Configure different filter elements to meet different filtration flow needs, and select filters with different structures according to different production conditions. The filters are all made of sanitary pipes and fittings, polished inside and outside and pickled passivated, which meets the requirements of sanitary grade. The shell material quality is 3 0 4, 3 1 6 L, P and spray tetrafluorine, etc., the normal working pressure is 0.6MPa, and the flange pressure grade PN10. Typical liquid filter down and out, less liquid accumulation, the lowest point of the sewage outlet design, to prevent contamination. GS type cartridge filter has the advantages of high filtration efficiency, simple structure and easy installation and replacement of filter elements.
GS type liquid filter outline size and selection table
Filter element configuration Inlet and outlet pipeline DN Import and export connections Overall dimension(mm) length quantity D L H h 5ˮ 1 15 Ready-to-install flange Ф102 210 455 No feet 10ˮ 20 575 20ˮ 1065 10ˮ 3 25 Ф186 320 730 260 20ˮ 40 980 30ˮ 1230 10ˮ 7 50 Ready-to-install flange Ф256 400 815 295 20ˮ 1065 30ˮ 1315 10ˮ 9 65 Ф306 480 855 325 20ˮ 1105 30ˮ 1355 20ˮ 12 65 Ready-to-install flange Ф356 540 1145 355 30ˮ 1395 40ˮ 1645 20ˮ 18 80 Ф406 600 1195 385 30ˮ 1445 40ˮ 1695 20ˮ 22 100 Ф456 670 1280 400 30ˮ 1530 40ˮ 1780 20ˮ 27 125 Ф506 720 1325 415 30ˮ 1575 40ˮ 1825 -
Ⅰ. Filter element ordering information
GS-PP size Filtration accuracy Interface type Sealing rings GS-PP/ZP 05=5" 010=0.1µm 1 = flat press S = silicone rubber 10=10" 022=0.22µm 2=226 (snap-in) E = EPDM 20=20" 045=0.45µm 3=222(plug-in) V = Viton elastomer 30=30" 1=1.0µm T = Vitonium 10=10µm Ⅱ、Liquid pre-filter design and selection
Liquid pre-filter design, selection table
Basic information of the material
Item name Flow rate (T/h) Viscosity (centipoise) PH value
Name of the main inclusion Solids content(%) Gross particle size distribution of solids (μm) Solid content recovery/clarification and impurity removal
Filter design
Filter housing material Filter operating temperature(°C) Filter working pressure (MPa)
Filter inlet and outlet connection method and size 304 □
316L □
304 inner wall sprayed with PTFE □
PP □
0.6MPa □
1.0MPa □
Clamps □
Flange □
Pagoda hose □
Filter material Filter element filtration accuracy Filter interface type
Filter element and cylinder sealing ring material Conclusion: Determine the specific model and specification of the filter.
Ⅲ、Liquid filter installation steps, liquid filter use precautions, chemical compatibility tableFor details, please refer to the "Customer Service/Technical Support" section of the company's website -
Fermentation aseptic feed filtration system
Liquid sterilization filter GS-PES/PTFE/NL type
GS-PES cartridge adopts US imported asymmetric polyethersulfone membrane, which has reliable retention efficiency, high flux, low protein adsorption performance and good anti-pollution ability
Liquid pre-filter GS-PP type / GS-PP ZP type
The new generation GS-PP series cartridge is made of sub-micron grade fiber with smaller fiber diameter, featuring large void ratio, high particle retention efficiency, large flux and long service life.
Bag filter GS-DS type
Bag filter is a kind of filtration equipment with a wide range of applications. The liquid flows into the bag from the inlet pipe beside the filter housing during filtration...
Steam filter GS-Z type
GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters.
Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
Category：
Liquid pre-filter GS-PP type / GS-PP ZP type / GS-GL type
- Cartridge
- Housing
- Design and selection instructions
- 产品链接
-
- Commodity name: Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
- Commodity ID: 994905591191003136
Liquid pre-filter GS-PP type / GS-PP ZP TYPE / GS-GL type
Ⅰ. Single-layer economical high-flux polypropylene fiber microporous filter membrane folding filter element (GS-PP) seriesGS-PP series pleated filter element is made of a new generation of submicron fiber, which has the characteristics of smaller fiber diameter, large porosity, high particle retention efficiency, high flux and long service life. The all-polypropylene construction provides broad chemical compatibility and can be used to filter a wide range of acids, bases and solvents, making it the most economical prefiltration element.Key features100% pure polypropylene structure
Wide chemical compatibility, pH operating range 1-14
Low differential pressure and long service life
0.1-50μm accuracy can meet the needs of different occasionsTypical applicationsPrefiltration of corrosive liquid filtration, various sterilization filtration
Traditional Chinese medicine oral liquid filtration, process water filtration, reverse osmosis water security filtration
Capture filtration of mineral water, beverages and beer, dust collector filtrationMaterial structureFilter media: Polypropylene (PP)
Support layer/guide layer: polypropylene
Shell/end cap/fin: polypropylene
Central tube: stainless steel or polypropylene
O-ring: see filter element selection table
Sealing technology: hot melt sealing technology without adhesiveFilter element parametersOuter diameter: Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration accuracy (μm): 0.1, 0.22, 0.45, 1, 3, 5
Effective filtration area: 0.45㎡~0.65㎡/10"Operation parametersMaximum operating temperature: <80°C
Maximum working pressure difference: forward: 4bar@23°C
Reverse: 2bar@23°C
Sterilization method: hot water 85°C/60minOrdering InformationGS-PVDF size Filtration accuracy Lower interface upper interface Sealing rings Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1 = flat press
2=226(regular)
3=222(General)
6=222 (lined steel ring)
7=226(lined steel ring)P = flat head
T = triangular fin
C = columnar wing tipS = silicone rubber
E = EPDM
V = Viton elastomer
T = FluoroelastomerR = disinfectable
W = not sterilizableⅡ、 High efficiency and long life combined polypropylene fiber folding cartridge GS-PP ZP series
GS-PPZp series folded cartridges are made by folding a new generation of submicron polypropylene filter media with multi-layer gradient precision, featuring higher dirt holding capacity, long life and high retention rate. The all-polypropylene structure provides wide chemical compatibility and can be used for filtration of various acids, alkalis and solvents. It can also be customized to meet the characteristics of the actual fluid, such as fluid viscosity, particle content and size, to ensure filtration efficiency and reduce operating costs.
Main features
100% pure polypropylene construction
Wide chemical compatibility, pH range 1-14
High dirt-holding capacity, high filtration efficiency and long service life
Customized to reduce filtration costsTypical Applications
Pre-filtration for fermentation broth filtration, various kinds of sterilization filtration
Pre-filtration of mineral water, beverages and wine
Fine filtration of fructose syrup, fine filtration of beer and pre-filtration of draft beerMaterial Structure
Filter material: combined polypropylene (PP)
Support layer/Infusion layer: Polypropylene
Housing/end cap/fin: polypropylene
Center tube: stainless steel or polypropylene
O-ring: see cartridge selection table
Sealing technology: adhesive-free thermal fusion sealing technologyCartridge parameters
Outer diameter：Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration precision (µm):0.1, 0.22, 0.45, 0.65, 1, 3, 5, 10
Effective filtration area: 0.45㎡～0.6㎡/10"Operating parameters
Maximum working temperature: ＜80℃
Max. working pressure difference: forward: 4bar@23℃
Reverse: 2bar@23℃
Sterilization mode: hot water 85℃/60minOrdering InformationGS-PP ZP Size Filtration accuracy Lower Interface Upper Interface Seals Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1=Flat press
2=226(regular)
3=222(Regular)
6=222(steel lined ring)
7=226(steel lined ring)P=Plat
T=Triangular fins
C=columnar fin tipS=Silicone rubber
E=Ethylene-Propylene
V=Fluoroelastomer
T=FluoroelastomerR = sterilizable
W=Non-sterilizableHigh dirt holding capacity, long life liquid composite glass fiber prefilter element GS-GL seriesThe new generation of GS-GL series filter element is made of glass fiber and polypropylene composite, with large dirt holding capacity, large filtration flow, large porosity, high particle retention efficiency, large flux and long service life. The composite structure of glass fiber and polypropylene provides a wide range of chemical compatibility and can be used to filter a wide range of acids, bases and solvents, making it the most economical prefilter element.Key featuresGlass fiber and polypropylene structure
Wide chemical compatibility, pH operating range 1-14
Low differential pressure and long service life
0.1-50um accuracy can meet the needs of different occasionsTypical applicationsPrefiltration of corrosive liquid filtration, various sterilization filtration
Process water filtration, reverse osmosis water security filtration
Capture filtration of mineral water, beverages and beer, dust collector filtrationMaterial structureFilter media: glass fiber composite filter media
Support layer/guide layer: polypropylene
Shell/end cap/fin: polypropylene
Central tube: stainless steel or polypropylene
O-ring: see filter element selection table
Sealing technology: hot melt sealing technology without adhesiveFilter element parametersOuter diameter: Φ68.5
Length: 5", 10", 20", 30", 40"
Filtration accuracy (μm): 1, 3, 5, 10
Effective filtration area: ≥0.50㎡/10"Operation parametersMaximum operating temperature: <80°C
Maximum working pressure difference: forward: 4bar@23°C
Reverse: 2bar@23°COrdering InformationGS-GL size Filtration accuracy Lower interface upper interface Sealing rings Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0300=1.0µm
0300=3.0µm
0500=5.0µm
1000=10µm1 = flat press
2=226(regular)
3=222(General)
6=222 (lined steel ring)
7=226(lined steel ring)P = flat head
T = triangular fin
C = columnar wing tipS = silicone rubber
E = EPDM
V = Viton elastomer
T = FluoroelastomerR = disinfectable
W = not sterilizable -
GS type cartridge liquid filter structure has single bottom opening, single upper and lower opening, upper and lower double opening and removable detachable flower disc base, which can meet the requirements of different filtration processes. Configure different filter elements to meet different filtration flow needs, and select filters with different structures according to different production conditions. The filters are all made of sanitary pipes and fittings, polished inside and outside and pickled passivated, which meets the requirements of sanitary grade. The shell material quality is 3 0 4, 3 1 6 L, P and spray tetrafluorine, etc., the normal working pressure is 0.6MPa, and the flange pressure grade PN10. Typical liquid filter down and out, less liquid accumulation, the lowest point of the sewage outlet design, to prevent contamination. GS type cartridge filter has the advantages of high filtration efficiency, simple structure and easy installation and replacement of filter elements.
GS type liquid filter outline size and selection table
Filter element configuration Inlet and outlet pipeline DN Import and export connections Overall dimension(mm) length quantity D L H h 5ˮ 1 15 Ready-to-install flange Ф102 210 455 No feet 10ˮ 20 575 20ˮ 1065 10ˮ 3 25 Ф186 320 730 260 20ˮ 40 980 30ˮ 1230 10ˮ 7 50 Ready-to-install flange Ф256 400 815 295 20ˮ 1065 30ˮ 1315 10ˮ 9 65 Ф306 480 855 325 20ˮ 1105 30ˮ 1355 20ˮ 12 65 Ready-to-install flange Ф356 540 1145 355 30ˮ 1395 40ˮ 1645 20ˮ 18 80 Ф406 600 1195 385 30ˮ 1445 40ˮ 1695 20ˮ 22 100 Ф456 670 1280 400 30ˮ 1530 40ˮ 1780 20ˮ 27 125 Ф506 720 1325 415 30ˮ 1575 40ˮ 1825 -
Ⅰ. Filter element ordering information
GS-PP size Filtration accuracy Interface type Sealing rings GS-PP/ZP 05=5" 010=0.1µm 1 = flat press S = silicone rubber 10=10" 022=0.22µm 2=226 (snap-in) E = EPDM 20=20" 045=0.45µm 3=222(plug-in) V = Viton elastomer 30=30" 1=1.0µm T = Vitonium 10=10µm Ⅱ、Liquid pre-filter design and selection
Liquid pre-filter design, selection table
Basic information of the material
Item name Flow rate (T/h) Viscosity (centipoise) PH value
Name of the main inclusion Solids content(%) Gross particle size distribution of solids (μm) Solid content recovery/clarification and impurity removal
Filter design
Filter housing material Filter operating temperature(°C) Filter working pressure (MPa)
Filter inlet and outlet connection method and size 304 □
316L □
304 inner wall sprayed with PTFE □
PP □
0.6MPa □
1.0MPa □
Clamps □
Flange □
Pagoda hose □
Filter material Filter element filtration accuracy Filter interface type
Filter element and cylinder sealing ring material Conclusion: Determine the specific model and specification of the filter.
Ⅲ、Liquid filter installation steps, liquid filter use precautions, chemical compatibility tableFor details, please refer to the "Customer Service/Technical Support" section of the company's website -
Fermentation aseptic feed filtration system
Liquid sterilization filter GS-PES/PTFE/NL type
GS-PES cartridge adopts US imported asymmetric polyethersulfone membrane, which has reliable retention efficiency, high flux, low protein adsorption performance and good anti-pollution ability
Liquid pre-filter GS-PP type / GS-PP ZP type
The new generation GS-PP series cartridge is made of sub-micron grade fiber with smaller fiber diameter, featuring large void ratio, high particle retention efficiency, large flux and long service life.
Bag filter GS-DS type
Bag filter is a kind of filtration equipment with a wide range of applications. The liquid flows into the bag from the inlet pipe beside the filter housing during filtration...
Steam filter GS-Z type
GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters.
Pre
Information
Fax：+86 21-56807944
E-mail：zzy@sh-filter.com.cn
Add：NO. 515，Cenglin Road，Lin-gang Special Area，China (Shanghai) Pilot Free Trade Zone
Powered by 300.cn The site is IPV6 enabled