- Products
Liquid pre-filter GS-PP type / GS-PP ZP type
Liquid pre-filter GS-PP type / GS-PP ZP type
所属分类：
Liquid pre-filter GS-PP type
- Cartridge
- Housing
- Design and selection instructions
- 产品链接
-
- Commodity name: Liquid pre-filter GS-PP type / GS-PP ZP type
- Commodity ID: 994905387603681280
Liquid pre-filter GS-PP type / GS-PP ZP type
I. Single-layer economic high-throughput polypropylene fiber microporous membrane folded cartridge (GS-PP) seriesGS-PP series folded cartridge is made of new generation submicron fiber with smaller fiber diameter, featuring large void rate, high particle retention efficiency, large flux and long service life. The all-polypropylene structure provides a wide range of chemical compatibility and can be used for the filtration of various acids, alkalis and solvents, making it the most economical pre-filter cartridge.Main features100% pure polypropylene construction
Wide chemical compatibility, pH operating range 1-14
Low differential pressure and long service life
0.1-50µm accuracy to meet the needs of different applicationsTypical ApplicationsCorrosive liquid filtration, pre-filtration for various kinds of sterilization filtration
Chinese medicine oral liquid filtration, process water filtration, reverse osmosis water security filtration
Mineral water, beverage and beer trapping filtration, dust removal respirator filtration
Material StructureFilter material: polypropylene (PP)
Support layer / infusion layer: polypropylene
Housing/end cap/fin: polypropylene
Center tube: stainless steel or polypropylene
O-ring: see cartridge selection table
Sealing technology: adhesive-free thermal fusion sealing technologyCartridge parametersOuter diameter：Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration precision (µm): 0.1, 0.22, 0.45, 1, 3, 5
Effective filtration area: 0.45㎡～0.65㎡/10"Operating parametersMaximum working temperature: <80℃
Max. working pressure difference: forward: 4bar@23℃
Reverse: 2bar@23℃
Sterilization mode: hot water 80℃/60minOrdering InformationGS-PVDF Size Filtration accuracy Lower Interface Upper Interface Seals Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1=Flat press
2=226(regular)
3=222(Regular)
6=222(steel lined ring)
7=226(steel lined ring)P=Plat
T=Triangular fins
C=columnar fin tipS=Silicone rubber
E=Ethylene-Propylene
V=Fluoroelastomer
T=FluoroelastomerR = sterilizable
W=Non-sterilizableⅡ、 High efficiency and long life combined polypropylene fiber folding cartridge GS-PP ZP seriesGS-PPZp series folded cartridges are made by folding a new generation of submicron polypropylene filter media with multi-layer gradient precision, featuring higher dirt holding capacity, long life and high retention rate. The all-polypropylene structure provides wide chemical compatibility and can be used for filtration of various acids, alkalis and solvents. It can also be customized to meet the characteristics of the actual fluid, such as fluid viscosity, particle content and size, to ensure filtration efficiency and reduce operating costs.Main features100% pure polypropylene construction
Wide chemical compatibility, pH range 1-14
High dirt-holding capacity, high filtration efficiency and long service life
Customized to reduce filtration costsTypical ApplicationsPre-filtration for fermentation broth filtration, various kinds of sterilization filtration
Pre-filtration of mineral water, beverages and wine
Fine filtration of fructose syrup, fine filtration of beer and pre-filtration of draft beerMaterial StructureFilter material: combined polypropylene (PP)
Support layer/Infusion layer: Polypropylene
Housing/end cap/fin: polypropylene
Center tube: stainless steel or polypropylene
O-ring: see cartridge selection table
Sealing technology: adhesive-free thermal fusion sealing technologyCartridge parametersOuter diameter：Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration precision (µm):0.1, 0.22, 0.45, 0.65, 1, 3, 5, 10
Effective filtration area: 0.45㎡～0.6㎡/10"Operating parametersMaximum working temperature: ＜80℃
Max. working pressure difference: forward: 4bar@23℃
Reverse: 2bar@23℃
Sterilization mode: hot water 85℃/60min
Ordering InformationGS-PP ZP Size Filtration accuracy Lower Interface Upper Interface Seals Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1=Flat press
2=226(regular)
3=222(Regular)
6=222(steel lined ring)
7=226(steel lined ring)P=Plat
T=Triangular fins
C=columnar fin tipS=Silicone rubber
E=Ethylene-Propylene
V=Fluoroelastomer
T=FluoroelastomerR = sterilizable
W=Non-sterilizableⅢ、 Meltblown, wire-wound, carbon fiber cartridgeGS-PPR meltblown cartridgeGS-PPR meltblown cartridge is a tubular cartridge made of non-toxic and odorless food-grade polypropylene particles, which is heated and molten, sprayed, drawn and received into shape. The cartridge has a multi-layer gradient structure, loose outside and tight inside, and gradual aperture, which features high filtration precision, stable filtration efficiency and low filtration cost.Technical parametersNominal filtration precision: 1/3/5/10/20/30/40/50µm
Filter element material: polypropylene
Working temperature: ≦60℃
Cartridge interface: flat pressure, 222#, 226#Typical ApplicationsSecurity filtration for reverse osmosis water treatment
Tap water and well water filtration Ink and ink filtration
GS-PPX wire-wound cartridgeGS-PPX wire-wound cartridge is made of textile fiber yarn precisely wound on the porous skeleton to control the fiber density of the filter layer and the shape of the filter pores to make cartridges of different filtration precision, with large dirt-holding capacity, suitable for high temperature and high viscous material filtration.Technical parametersNominal filtration precision: 1/3/5/10/20/30/40/50µm
Filter element material: polypropylene, skimmed cotton
Working temperature: ≦60℃ (PP) ≦120℃ (skimmed cotton stainless steel skeleton)
Cartridge interface: flat press, 222#, 226#Typical ApplicationsSecurity filtration for reverse osmosis water treatment
Tap water and well water filtration Ink and ink filtration
GS-ACF carbon fiber cartridge
GS-ACF is a new generation of environmentally friendly functional material made of activated carbon fiber, which is a novel adsorption material. It has the characteristics of fine fiber, large specific surface area, fast adsorption speed and no dissolved material, especially suitable for chlorine, organic odor, oil and pigment with strong adsorption capacity.
Technical parametersNominal filtration precision: 1///5/10
Filter element material: activated carbon fiber
Working temperature: ≦80℃
Cartridge interface: 222#, 226#, flat pressureTypical ApplicationsOrganic matter odor removal and turbidity reduction in water
Decolorization and filtration Removal of residual chlorine Air degreasing
Ⅳ、High temperature and high pressure resistant metal material series cartridge
GS-Ti metal titanium rod cartridge
This product is made of industrial high purity titanium powder as the main raw material, sieved, cold isostatically pressed, and then sintered by high temperature and high vacuum to form a deep porous titanium filter element. It has a solid structure, high void ratio, controllable pore size distribution and low filtration resistance. It has the characteristics of high temperature resistance, chemical corrosion resistance, oxidation resistance, long life and can be cleaned and regenerated.Technical parameters
Nominal filtration precision: 0.45/1/3/5/10/20/30/50µm
Filter element material: titanium metal
Working temperature: ≦280℃
Cartridge interface: thread, 222#, 226#, flat pressure and other non-standard interfacesTypical ApplicationsSteam filtration Liquid decarbonization filtration
Ozonated water filtration Corrosive liquid filtration
GS-BG Five-layer sintered mesh cartridge
The product is made of five-layer stainless steel sintered grid sintered by high-temperature vacuum sintering, which features stronger structure, good permeability, high temperature resistance, strong corrosion resistance, easy backwashing and no material shedding, etc. G S - B G is divided into GS - B G4 and GS - BG6. GS - BG4 is 304 stainless steel five-layer sintered cartridge; GS - BG6 is 316L stainless steel five-layer sintered cartridge.
Technical parameters
Nominal filtration precision: 1/2/3/5/10/20/30/50/75/100µm
Filter element material: stainless steel 304/316/316L
Working temperature: ≦480℃
Cartridge interface: thread, 222#, 226# and other non-standard interfacesTypical ApplicationsSteam filtration Liquid decarburization filtration Viscous liquid filtration Corrosive liquid filtration
Liquid and gas filtration under high temperature and pressure
GS-CS Stainless Steel Folding Cartridge
This product is a porous deep layer cartridge made of stainless steel sintered felt or stainless steel woven grid folded cartridge, and the folded cartridge made of it has the characteristics of large filtering surface area, high void ratio, strong dirt holding capacity and strong structure. GS-CS4 is 304 stainless steel woven grid folded cartridge; GS-CS6 is 316L stainless steel woven grid folded cartridge.
Technical parameters
Nominal filtration precision: 3/5/10/15/20/30/40/60/100µm
Filter element material: stainless steel 304/316/316L
Mesh cover: with/without (optional)
Working temperature: ≦480℃
Cartridge interface: thread, 222#, 226# and other non-standard interfacesTypical ApplicationsSteam filtration Liquid decarbonization filtration Viscous liquid filtration Corrosive liquid filtration
High-temperature, high-pressure liquid and gas filtration Corrosive liquid filtration.
High-temperature, high-pressure liquid and gas filtration
-
GS type core filter has the advantages of high filtration efficiency, simple structure and easy installation and replacement of filter elements. The filter structure includes single lower opening, single upper opening, upper and lower double opening of the cartridge, and the detachable dismounting type of the base of the flower disk. Different numbers of filter elements are configured to meet different filtration flow requirements, and different structures of filters are selected according to different production conditions. All the filters are made of sanitary piping and fittings, polished inside and outside and pickled and passivated to meet the requirements of sanitary grade. The shell material is 304, 316L, 304 stainless steel with inner wall spraying Teflon, PP (can be customized), etc. The conventional working pressure is 0.6MPa and the flange pressure grade is PN10. The typical liquid filter has lower inlet and lower outlet, less liquid accumulation, and the lowest point of the discharge port is designed to prevent pollution.
GS series core type liquid filter outline size table
Cartridge configuration Import and export pipes
DN
Import/export connections Dimension
（mm）
Length Quantity D
L
H
h
5ˮ
1
15
Quick-fit type
Flange typeФ102
210
455
No legs 10ˮ
20
575
20ˮ
1065
10ˮ
3
25
Ф186
320
730
260
20ˮ
40
980
30ˮ
1230
10ˮ
7
50
Quick-fit type
Flange typeФ256
400
815
295
20ˮ
1065
30ˮ
1315
10ˮ
9
65
Ф306
480
855
325
20ˮ
1105
30ˮ
1355
20ˮ
12
65
Flange type Ф356
540
1145
355
30ˮ
1395
40ˮ
1645
20ˮ
18
80
Ф406
600
1195
385
30ˮ
1445
40ˮ
1695
20ˮ
22
100
Ф456
670
1280
400
30ˮ
1530
40ˮ
1780
20ˮ
27
125
Ф506
720
1325
415
30ˮ
1575
40ˮ
1825
GS-Ti type decarburization filter
GS-Ti decarburization filter adopts swinging design, the cartridge can be turned over 180°, which is suitable for decarburization filtration of material liquid with high solid content, and the activated carbon and its particles outside the cartridge can all be discharged. The shell material is 304 and 316L, the feeding method is up and down and left and right, and the cartridge is made of metal titanium rod, which has the characteristics of corrosion resistance, high strength, long life, easy backwashing and regeneration. It is widely used in bio-pharmaceutical, pharmaceutical and chemical, food and beverage industries for carbon removal and filtration.
Charcoal dosage (Kg) 3
6
10
Flow rate (T/h) 0.6～1.0
1.0～1.5
1.5～2.0
Number of 20" titanium rods (pieces) 6
9
15
Cylinder diameter (mm) 230
350
500
-
I. Cartridge ordering information
GS-PP Size Filtration accuracy Interface Type Seals GS-PP/ZP 05=5" 010=0.1µm 1=Flat press S=Silicone rubber 10=10" 022=0.22µm 2=226 (snap-in) E = EPDM 20=20" 045=0.45µm 3=222 (inserted) V=Fluoroelastomer 30=30" 1=1.0µm T=Fluoroelastomer coated 10=10µm Ⅱ、The liquid pre-filter design, selection
Liquid filter design, selection table
Material Basics Material name Flow rate (T/h) Viscosity (centipoise) PH value Name of main solids Solids content(%) Bulk particle size distribution of solids (µm) Solids recovery/clarification and debris removal Filter design Filter housing material Filter working temperature(℃) Filter working pressure (MPa) Filter inlet and outlet connection method and size 304 □316L □304 inner wall coating PTFE □PP □0.6MPa □1.0MPa □Clamp □
Flange □
Pagoda hose □Cartridge material Filter cartridge filtration precision Cartridge interface form Cartridge and cartridge sealing ring material Conclusion: Determine the specific model and specification of the filter. Ⅲ、Liquid filter installation steps, liquid filter use precautions, chemical compatibility table(For details, please refer to the "Technical Communication" section of our website) -
Material removal, clarification, aseptic filtration system
Liquid Fine Filter GS-PES/NL/PTFE/PVDF
GS-PES cartridge adopts US imported asymmetric polyethersulfone membrane, which has reliable retention efficiency, high flux, low protein adsorption performance and good anti-pollution ability
Liquid pre-filter GS-PP type / GS-PP ZP type
The new generation GS-PP series cartridge is made of sub-micron grade fiber with smaller fiber diameter, featuring large void ratio, high particle retention efficiency, large flux and long service life.
Bag filter GS-DS type
Bag filter is a kind of filtration equipment with a wide range of applications. When filtering, the liquid flows into the bag from the inlet pipe beside the filter housing, and the bag is supported by a metal mesh basket...
Basket filter GS-LS/LPG, GS-LS/LPGG type
The filter basket materials are stainless steel perforated plate, stainless steel winding screen tube, stainless steel perforated plate composite multi-layer screen; filter basket materials are 304 and 316L, as well as filter basket surface spraying PTFE treatment, in order to apply to the filtration of different characteristics of the material liquid.
Steam filter GS-Z
GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters, and can also be used for steam filtration in other places.
Sterilization grade air respirator GS-HX type
GS-HX type sterilization air respirator is suitable for installation on the air exchange hole of various types of liquid storage tanks, pure water tanks and sterile dry boxes for sterilization and filtration of gas during gas exchange
Liquid pre-filter GS-PP type / GS-PP ZP type
Liquid pre-filter GS-PP type / GS-PP ZP type
Category：
Liquid pre-filter GS-PP type
- Cartridge
- Housing
- Design and selection instructions
- 产品链接
-
- Commodity name: Liquid pre-filter GS-PP type / GS-PP ZP type
- Commodity ID: 994905387603681280
Liquid pre-filter GS-PP type / GS-PP ZP type
I. Single-layer economic high-throughput polypropylene fiber microporous membrane folded cartridge (GS-PP) seriesGS-PP series folded cartridge is made of new generation submicron fiber with smaller fiber diameter, featuring large void rate, high particle retention efficiency, large flux and long service life. The all-polypropylene structure provides a wide range of chemical compatibility and can be used for the filtration of various acids, alkalis and solvents, making it the most economical pre-filter cartridge.Main features100% pure polypropylene construction
Wide chemical compatibility, pH operating range 1-14
Low differential pressure and long service life
0.1-50µm accuracy to meet the needs of different applicationsTypical ApplicationsCorrosive liquid filtration, pre-filtration for various kinds of sterilization filtration
Chinese medicine oral liquid filtration, process water filtration, reverse osmosis water security filtration
Mineral water, beverage and beer trapping filtration, dust removal respirator filtrationMaterial StructureFilter material: polypropylene (PP)
Support layer / infusion layer: polypropylene
Housing/end cap/fin: polypropylene
Center tube: stainless steel or polypropylene
O-ring: see cartridge selection table
Sealing technology: adhesive-free thermal fusion sealing technologyCartridge parametersOuter diameter：Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration precision (µm): 0.1, 0.22, 0.45, 1, 3, 5
Effective filtration area: 0.45㎡～0.65㎡/10"Operating parametersMaximum working temperature: <80℃
Max. working pressure difference: forward: 4bar@23℃
Reverse: 2bar@23℃
Sterilization mode: hot water 80℃/60minOrdering InformationGS-PVDF Size Filtration accuracy Lower Interface Upper Interface Seals Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1=Flat press
2=226(regular)
3=222(Regular)
6=222(steel lined ring)
7=226(steel lined ring)P=Plat
T=Triangular fins
C=columnar fin tipS=Silicone rubber
E=Ethylene-Propylene
V=Fluoroelastomer
T=FluoroelastomerR = sterilizable
W=Non-sterilizableⅡ、 High efficiency and long life combined polypropylene fiber folding cartridge GS-PP ZP seriesGS-PPZp series folded cartridges are made by folding a new generation of submicron polypropylene filter media with multi-layer gradient precision, featuring higher dirt holding capacity, long life and high retention rate. The all-polypropylene structure provides wide chemical compatibility and can be used for filtration of various acids, alkalis and solvents. It can also be customized to meet the characteristics of the actual fluid, such as fluid viscosity, particle content and size, to ensure filtration efficiency and reduce operating costs.Main features100% pure polypropylene construction
Wide chemical compatibility, pH range 1-14
High dirt-holding capacity, high filtration efficiency and long service life
Customized to reduce filtration costsTypical ApplicationsPre-filtration for fermentation broth filtration, various kinds of sterilization filtration
Pre-filtration of mineral water, beverages and wine
Fine filtration of fructose syrup, fine filtration of beer and pre-filtration of draft beerMaterial StructureFilter material: combined polypropylene (PP)
Support layer/Infusion layer: Polypropylene
Housing/end cap/fin: polypropylene
Center tube: stainless steel or polypropylene
O-ring: see cartridge selection table
Sealing technology: adhesive-free thermal fusion sealing technologyCartridge parametersOuter diameter：Φ68.5
Length: 5", 10", 20", 30", 40", 50"
Filtration precision (µm):0.1, 0.22, 0.45, 0.65, 1, 3, 5, 10
Effective filtration area: 0.45㎡～0.6㎡/10"Operating parametersMaximum working temperature: ＜80℃
Max. working pressure difference: forward: 4bar@23℃
Reverse: 2bar@23℃
Sterilization mode: hot water 85℃/60minOrdering InformationGS-PP ZP Size Filtration accuracy Lower Interface Upper Interface Seals Type of disinfection 05=5"
10=10"
20=20"
30=30"
40=40"0010=0.10µm
0022=0.22µm
0045=0.45µm
0065=0.65µm
0100=1.0µm
0500=5.0µm
1000=10µm1=Flat press
2=226(regular)
3=222(Regular)
6=222(steel lined ring)
7=226(steel lined ring)P=Plat
T=Triangular fins
C=columnar fin tipS=Silicone rubber
E=Ethylene-Propylene
V=Fluoroelastomer
T=FluoroelastomerR = sterilizable
W=Non-sterilizableⅢ、 Meltblown, wire-wound, carbon fiber cartridgeGS-PPR meltblown cartridgeGS-PPR meltblown cartridge is a tubular cartridge made of non-toxic and odorless food-grade polypropylene particles, which is heated and molten, sprayed, drawn and received into shape. The cartridge has a multi-layer gradient structure, loose outside and tight inside, and gradual aperture, which features high filtration precision, stable filtration efficiency and low filtration cost.Technical parametersNominal filtration precision: 1/3/5/10/20/30/40/50µm
Filter element material: polypropylene
Working temperature: ≦60℃
Cartridge interface: flat pressure, 222#, 226#Typical ApplicationsSecurity filtration for reverse osmosis water treatment
Tap water and well water filtration Ink and ink filtrationGS-PPX wire-wound cartridgeGS-PPX wire-wound cartridge is made of textile fiber yarn precisely wound on the porous skeleton to control the fiber density of the filter layer and the shape of the filter pores to make cartridges of different filtration precision, with large dirt-holding capacity, suitable for high temperature and high viscous material filtration.Technical parametersNominal filtration precision: 1/3/5/10/20/30/40/50µm
Filter element material: polypropylene, skimmed cotton
Working temperature: ≦60℃ (PP) ≦120℃ (skimmed cotton stainless steel skeleton)
Cartridge interface: flat press, 222#, 226#Typical ApplicationsSecurity filtration for reverse osmosis water treatment
Tap water and well water filtration Ink and ink filtrationGS-ACF carbon fiber cartridge
GS-ACF is a new generation of environmentally friendly functional material made of activated carbon fiber, which is a novel adsorption material. It has the characteristics of fine fiber, large specific surface area, fast adsorption speed and no dissolved material, especially suitable for chlorine, organic odor, oil and pigment with strong adsorption capacity.
Technical parametersNominal filtration precision: 1///5/10
Filter element material: activated carbon fiber
Working temperature: ≦80℃
Cartridge interface: 222#, 226#, flat pressureTypical ApplicationsOrganic matter odor removal and turbidity reduction in water
Decolorization and filtration Removal of residual chlorine Air degreasingⅣ、High temperature and high pressure resistant metal material series cartridge
GS-Ti metal titanium rod cartridge
This product is made of industrial high purity titanium powder as the main raw material, sieved, cold isostatically pressed, and then sintered by high temperature and high vacuum to form a deep porous titanium filter element. It has a solid structure, high void ratio, controllable pore size distribution and low filtration resistance. It has the characteristics of high temperature resistance, chemical corrosion resistance, oxidation resistance, long life and can be cleaned and regenerated.Technical parameters
Nominal filtration precision: 0.45/1/3/5/10/20/30/50µm
Filter element material: titanium metal
Working temperature: ≦280℃
Cartridge interface: thread, 222#, 226#, flat pressure and other non-standard interfacesTypical ApplicationsSteam filtration Liquid decarbonization filtration
Ozonated water filtration Corrosive liquid filtrationGS-BG Five-layer sintered mesh cartridge
The product is made of five-layer stainless steel sintered grid sintered by high-temperature vacuum sintering, which features stronger structure, good permeability, high temperature resistance, strong corrosion resistance, easy backwashing and no material shedding, etc. G S - B G is divided into GS - B G4 and GS - BG6. GS - BG4 is 304 stainless steel five-layer sintered cartridge; GS - BG6 is 316L stainless steel five-layer sintered cartridge.
Technical parameters
Nominal filtration precision: 1/2/3/5/10/20/30/50/75/100µm
Filter element material: stainless steel 304/316/316L
Working temperature: ≦480℃
Cartridge interface: thread, 222#, 226# and other non-standard interfacesTypical ApplicationsSteam filtration Liquid decarburization filtration Viscous liquid filtration Corrosive liquid filtration
Liquid and gas filtration under high temperature and pressureGS-CS Stainless Steel Folding Cartridge
This product is a porous deep layer cartridge made of stainless steel sintered felt or stainless steel woven grid folded cartridge, and the folded cartridge made of it has the characteristics of large filtering surface area, high void ratio, strong dirt holding capacity and strong structure. GS-CS4 is 304 stainless steel woven grid folded cartridge; GS-CS6 is 316L stainless steel woven grid folded cartridge.
Technical parameters
Nominal filtration precision: 3/5/10/15/20/30/40/60/100µm
Filter element material: stainless steel 304/316/316L
Mesh cover: with/without (optional)
Working temperature: ≦480℃
Cartridge interface: thread, 222#, 226# and other non-standard interfacesTypical ApplicationsSteam filtration Liquid decarbonization filtration Viscous liquid filtration Corrosive liquid filtration
High-temperature, high-pressure liquid and gas filtration Corrosive liquid filtration.
High-temperature, high-pressure liquid and gas filtration -
GS type core filter has the advantages of high filtration efficiency, simple structure and easy installation and replacement of filter elements. The filter structure includes single lower opening, single upper opening, upper and lower double opening of the cartridge, and the detachable dismounting type of the base of the flower disk. Different numbers of filter elements are configured to meet different filtration flow requirements, and different structures of filters are selected according to different production conditions. All the filters are made of sanitary piping and fittings, polished inside and outside and pickled and passivated to meet the requirements of sanitary grade. The shell material is 304, 316L, 304 stainless steel with inner wall spraying Teflon, PP (can be customized), etc. The conventional working pressure is 0.6MPa and the flange pressure grade is PN10. The typical liquid filter has lower inlet and lower outlet, less liquid accumulation, and the lowest point of the discharge port is designed to prevent pollution.
GS series core type liquid filter outline size table
Cartridge configuration Import and export pipes
DN
Import/export connections Dimension
（mm）
Length Quantity D
L
H
h
5ˮ
1
15
Quick-fit type
Flange typeФ102
210
455
No legs 10ˮ
20
575
20ˮ
1065
10ˮ
3
25
Ф186
320
730
260
20ˮ
40
980
30ˮ
1230
10ˮ
7
50
Quick-fit type
Flange typeФ256
400
815
295
20ˮ
1065
30ˮ
1315
10ˮ
9
65
Ф306
480
855
325
20ˮ
1105
30ˮ
1355
20ˮ
12
65
Flange type Ф356
540
1145
355
30ˮ
1395
40ˮ
1645
20ˮ
18
80
Ф406
600
1195
385
30ˮ
1445
40ˮ
1695
20ˮ
22
100
Ф456
670
1280
400
30ˮ
1530
40ˮ
1780
20ˮ
27
125
Ф506
720
1325
415
30ˮ
1575
40ˮ
1825
GS-Ti type decarburization filter
GS-Ti decarburization filter adopts swinging design, the cartridge can be turned over 180°, which is suitable for decarburization filtration of material liquid with high solid content, and the activated carbon and its particles outside the cartridge can all be discharged. The shell material is 304 and 316L, the feeding method is up and down and left and right, and the cartridge is made of metal titanium rod, which has the characteristics of corrosion resistance, high strength, long life, easy backwashing and regeneration. It is widely used in bio-pharmaceutical, pharmaceutical and chemical, food and beverage industries for carbon removal and filtration.
Charcoal dosage (Kg) 3
6
10
Flow rate (T/h) 0.6～1.0
1.0～1.5
1.5～2.0
Number of 20" titanium rods (pieces) 6
9
15
Cylinder diameter (mm) 230
350
500
-
I. Cartridge ordering information
GS-PP Size Filtration accuracy Interface Type Seals GS-PP/ZP 05=5" 010=0.1µm 1=Flat press S=Silicone rubber 10=10" 022=0.22µm 2=226 (snap-in) E = EPDM 20=20" 045=0.45µm 3=222 (inserted) V=Fluoroelastomer 30=30" 1=1.0µm T=Fluoroelastomer coated 10=10µm Ⅱ、The liquid pre-filter design, selection
Liquid filter design, selection table
Material Basics Material name Flow rate (T/h) Viscosity (centipoise) PH value Name of main solids Solids content(%) Bulk particle size distribution of solids (µm) Solids recovery/clarification and debris removal Filter design Filter housing material Filter working temperature(℃) Filter working pressure (MPa) Filter inlet and outlet connection method and size 304 □316L □304 inner wall coating PTFE □PP □0.6MPa □1.0MPa □Clamp □
Flange □
Pagoda hose □Cartridge material Filter cartridge filtration precision Cartridge interface form Cartridge and cartridge sealing ring material Conclusion: Determine the specific model and specification of the filter. Ⅲ、Liquid filter installation steps, liquid filter use precautions, chemical compatibility table(For details, please refer to the "Technical Communication" section of our website) -
Material removal, clarification, aseptic filtration system
Liquid Fine Filter GS-PES/NL/PTFE/PVDF
GS-PES cartridge adopts US imported asymmetric polyethersulfone membrane, which has reliable retention efficiency, high flux, low protein adsorption performance and good anti-pollution ability
Liquid pre-filter GS-PP type / GS-PP ZP type
The new generation GS-PP series cartridge is made of sub-micron grade fiber with smaller fiber diameter, featuring large void ratio, high particle retention efficiency, large flux and long service life.
Bag filter GS-DS type
Bag filter is a kind of filtration equipment with a wide range of applications. When filtering, the liquid flows into the bag from the inlet pipe beside the filter housing, and the bag is supported by a metal mesh basket...
Basket filter GS-LS/LPG, GS-LS/LPGG type
The filter basket materials are stainless steel perforated plate, stainless steel winding screen tube, stainless steel perforated plate composite multi-layer screen; filter basket materials are 304 and 316L, as well as filter basket surface spraying PTFE treatment, in order to apply to the filtration of different characteristics of the material liquid.
Steam filter GS-Z
GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters, and can also be used for steam filtration in other places.
Sterilization grade air respirator GS-HX type
GS-HX type sterilization air respirator is suitable for installation on the air exchange hole of various types of liquid storage tanks, pure water tanks and sterile dry boxes for sterilization and filtration of gas during gas exchange
Pre
Information
Fax：+86 21-56807944
E-mail：zzy@sh-filter.com.cn
Add：NO. 515，Cenglin Road，Lin-gang Special Area，China (Shanghai) Pilot Free Trade Zone
Powered by 300.cn The site is IPV6 enabled