Partitioned Air Filter GS-TH Series / High Temperature Resistant GS-TR Series


Partitioned Air Filter GS-TH Series

所属分类:

Partitioned Air Filter GS-TH Series / High Temperature Resistant GS-TR Series


  • Cartridge
  • Housing
  • Design and selection instructions
  • 产品链接
    • Commodity name: Partitioned Air Filter GS-TH Series / High Temperature Resistant GS-TR Series
    • Commodity ID: 994905763165855744

    Partitioned Air Filter GS-TH Series

    I. GS-CH series non-spacer filter
     
    GS-CH series spacerless filter is processed by fully automatic production line with special glass fiber as filter material and special hot melt adhesive as filter material spacer. It has the characteristics of higher precision, lower resistance and higher flux. It is widely used in various occasions where air pollution is strictly controlled.

    有隔板空气过滤器GS-TH系列/耐高温GS-TR系列

    Main features
    There are three kinds of efficiency: high efficiency, sub-efficiency and medium efficiency
    Special glass fiber filter media for filtration
    Special hot melt adhesive folding technology
    High efficiency and low resistance
    Unit-by-unit laser scanning integrity check

    Typical Applications
    End-of-line filtration for cleanrooms in the electronics, biological and pharmaceutical industries
    End-of-line filtration in hospital operating rooms
    Other applications requiring high cleanliness

    Filter parameters

     
    Dimension mm

    Filtration area m2

    Resistance Pa at wind speed 0.45m/s Recommended air volume m3/h

    610×610×70

    11.44

    150~240

    6001000

    915×610×70

    17.18

    9001500

    320×320×90

    4.07

    300400

    484×484×90

    9.59

    7001900

    630×630×90

    16.45

    12001500

    Note: Our company accepts orders for filters not on the table specifications. In case of specification and structure change, the latest data provided by our company shall prevail, without prior notice.

     

    II. GS-TH Series Separator Filter

    GS-TH series spacer filter is made of special glass fiber as filter material, customized aluminum foil and adhesive paper as spacer, and processed by semi-mechanized equipment. It has the characteristics of large dust capacity, low resistance and large flux. It is applied to the indoor and occasions with high cleanliness requirements.

    有隔板空气过滤器GS-TH系列/耐高温GS-TR系列

    Main features
    Two kinds of efficiency: high efficiency and sub-efficiency
    Special 100% glass fiber filter media
    Customized aluminum foil and adhesive paper spacers
    High dust holding capacity, low resistance and high throughput
    Unit-by-unit laser scanning integrity check

    Typical Applications
    End-of-line filtration for cleanrooms in the electronics, biological and pharmaceutical industries
    End-of-line filtration in hospital operating rooms
    Other applications requiring high cleanliness

    Filter parameters

    Dimension mm Filtration area m2 Initial resistance Pa Recommended air volume m3/h

    630×630×150

    9.3

    150220

    9001100

    320×320×220

    3.5

    300500

    484×484×220

    8.2

    8001000

    630×630×220

    14.2

    13001500

    Note: Our company accepts orders for filters not on the table specifications. In case of specification and structure change, the latest data provided by our company shall prevail, without prior notice.

     

    Ⅲ、GS-TR series high temperature resistant filter

    GS-TR series high temperature resistant filter is made of special glass fiber as filter material, special aluminum foil as spacer, stainless steel as frame, with high temperature resistant sealing strip, all materials are high temperature resistant. It has the characteristics of high efficiency, low resistance and high temperature resistance. It is suitable for devices and systems of high temperature air purification.

    有隔板空气过滤器GS-TH系列/耐高温GS-TR系列

    Main Features

    Special 100% glass fiber media as filter media
    Customized aluminum foil spacer
    Stainless steel frame, high temperature resistant sealant
    High efficiency, low resistance, high temperature resistance
    Each unit is rigorously tested

    Typical applications
    Terminal filtration for paint booths in the automotive industry
    Terminal filtration for ultra-clean ovens
    Terminal filtration in the fine baking workshop of the pharmaceutical industry

    Filter parameters

    Dimension

    mm

    Filtration area

    m2

    Initial resistance

    Pa

    Recommended air volume

    m3/h

    484×484×150

    5.6

    190

    500700

    610×610×150

    8.8

    9001100

    484×484×220

    8.2

    8001000

    630×630×220

    14.2

    13001500

    Note: Our company accepts orders for filters not on the table specifications. In case of specification and structure change, the latest data provided by our company shall prevail, without prior notice.

  • Clean air conditioning and filtration systems for aseptic rooms and fine bakery sections

     

    Primary filter GS-EP series

    GS-EP series plate filter is made of special chemical fiber as filter material, which has the characteristics of large flux, low resistance and good versatility. It is applied to the system that needs air purification.

     

    Medium Efficiency Filter GS-EB Series

    The new generation GS-EB series bag filter specially made chemical fiber is the filter material, which has the characteristics of large flux, low resistance and good versatility. It is applied to the system that needs air purification.

     

    Sub-efficient filter GS-CP series

    GS-CP series combined filter is processed by automatic equipment with special glass fiber and polypropylene as filter material and special hot melt adhesive as filter material interval. It has the characteristics of high precision, low resistance and large flux.

     

    High efficiency filter GS-CH/TH

    GS-CH series spacerless filter is processed by fully automatic production line with special glass fiber as filter material and special hot melt adhesive as filter material spacer.

     

    High efficiency filter GS-CH/TH

    GS-CH series spacerless filter is processed by fully automatic production line with special glass fiber as filter material and special hot melt adhesive as filter material spacer.

     

    GS-2FD Ultra Clean Bench

    The ultra-clean bench is designed to meet the needs of medical, health, pharmaceutical, biopharmaceutical, food and beverage, optoelectronic industries and scientific research experiments.

     

     

     

     

     

     

    img

上一页

下一页

上一页

下一页

Partitioned Air Filter GS-TH Series / High Temperature Resistant GS-TR Series


Partitioned Air Filter GS-TH Series

Category:

Partitioned Air Filter GS-TH Series / High Temperature Resistant GS-TR Series


  • Cartridge
  • Housing
  • Design and selection instructions
  • 产品链接
    • Commodity name: Partitioned Air Filter GS-TH Series / High Temperature Resistant GS-TR Series
    • Commodity ID: 994905763165855744

    Partitioned Air Filter GS-TH Series

    I. GS-CH series non-spacer filter
     
    GS-CH series spacerless filter is processed by fully automatic production line with special glass fiber as filter material and special hot melt adhesive as filter material spacer. It has the characteristics of higher precision, lower resistance and higher flux. It is widely used in various occasions where air pollution is strictly controlled.

    有隔板空气过滤器GS-TH系列/耐高温GS-TR系列

    Main features
    There are three kinds of efficiency: high efficiency, sub-efficiency and medium efficiency
    Special glass fiber filter media for filtration
    Special hot melt adhesive folding technology
    High efficiency and low resistance
    Unit-by-unit laser scanning integrity check

    Typical Applications
    End-of-line filtration for cleanrooms in the electronics, biological and pharmaceutical industries
    End-of-line filtration in hospital operating rooms
    Other applications requiring high cleanliness

    Filter parameters

     
    Dimension mm

    Filtration area m2

    Resistance Pa at wind speed 0.45m/s Recommended air volume m3/h

    610×610×70

    11.44

    150~240

    6001000

    915×610×70

    17.18

    9001500

    320×320×90

    4.07

    300400

    484×484×90

    9.59

    7001900

    630×630×90

    16.45

    12001500

    Note: Our company accepts orders for filters not on the table specifications. In case of specification and structure change, the latest data provided by our company shall prevail, without prior notice.

     

    II. GS-TH Series Separator Filter

    GS-TH series spacer filter is made of special glass fiber as filter material, customized aluminum foil and adhesive paper as spacer, and processed by semi-mechanized equipment. It has the characteristics of large dust capacity, low resistance and large flux. It is applied to the indoor and occasions with high cleanliness requirements.

    有隔板空气过滤器GS-TH系列/耐高温GS-TR系列

    Main features
    Two kinds of efficiency: high efficiency and sub-efficiency
    Special 100% glass fiber filter media
    Customized aluminum foil and adhesive paper spacers
    High dust holding capacity, low resistance and high throughput
    Unit-by-unit laser scanning integrity check

    Typical Applications
    End-of-line filtration for cleanrooms in the electronics, biological and pharmaceutical industries
    End-of-line filtration in hospital operating rooms
    Other applications requiring high cleanliness

    Filter parameters

    Dimension mm Filtration area m2 Initial resistance Pa Recommended air volume m3/h

    630×630×150

    9.3

    150220

    9001100

    320×320×220

    3.5

    300500

    484×484×220

    8.2

    8001000

    630×630×220

    14.2

    13001500

    Note: Our company accepts orders for filters not on the table specifications. In case of specification and structure change, the latest data provided by our company shall prevail, without prior notice.

     

    Ⅲ、GS-TR series high temperature resistant filter

    GS-TR series high temperature resistant filter is made of special glass fiber as filter material, special aluminum foil as spacer, stainless steel as frame, with high temperature resistant sealing strip, all materials are high temperature resistant. It has the characteristics of high efficiency, low resistance and high temperature resistance. It is suitable for devices and systems of high temperature air purification.

    有隔板空气过滤器GS-TH系列/耐高温GS-TR系列

    Main Features

    Special 100% glass fiber media as filter media
    Customized aluminum foil spacer
    Stainless steel frame, high temperature resistant sealant
    High efficiency, low resistance, high temperature resistance
    Each unit is rigorously tested

    Typical applications
    Terminal filtration for paint booths in the automotive industry
    Terminal filtration for ultra-clean ovens
    Terminal filtration in the fine baking workshop of the pharmaceutical industry

    Filter parameters

    Dimension

    mm

    Filtration area

    m2

    Initial resistance

    Pa

    Recommended air volume

    m3/h

    484×484×150

    5.6

    190

    500700

    610×610×150

    8.8

    9001100

    484×484×220

    8.2

    8001000

    630×630×220

    14.2

    13001500

    Note: Our company accepts orders for filters not on the table specifications. In case of specification and structure change, the latest data provided by our company shall prevail, without prior notice.

  • Clean air conditioning and filtration systems for aseptic rooms and fine bakery sections

     

    Primary filter GS-EP series

    GS-EP series plate filter is made of special chemical fiber as filter material, which has the characteristics of large flux, low resistance and good versatility. It is applied to the system that needs air purification.

     

    Medium Efficiency Filter GS-EB Series

    The new generation GS-EB series bag filter specially made chemical fiber is the filter material, which has the characteristics of large flux, low resistance and good versatility. It is applied to the system that needs air purification.

     

    Sub-efficient filter GS-CP series

    GS-CP series combined filter is processed by automatic equipment with special glass fiber and polypropylene as filter material and special hot melt adhesive as filter material interval. It has the characteristics of high precision, low resistance and large flux.

     

    High efficiency filter GS-CH/TH

    GS-CH series spacerless filter is processed by fully automatic production line with special glass fiber as filter material and special hot melt adhesive as filter material spacer.

     

    High efficiency filter GS-CH/TH

    GS-CH series spacerless filter is processed by fully automatic production line with special glass fiber as filter material and special hot melt adhesive as filter material spacer.

     

    GS-2FD Ultra Clean Bench

    The ultra-clean bench is designed to meet the needs of medical, health, pharmaceutical, biopharmaceutical, food and beverage, optoelectronic industries and scientific research experiments.

     

     

     

     

     

     

    img

Pre

Next

Pre

Next