Case air total filter GS-B1 type


Total air filter GS-B1 type

所属分类:

Total air filter GS-B1 type


  • Cartridge
  • Housing
  • Design and selection instructions
  • 产品链接
    • Commodity name: Case air total filter GS-B1 type
    • Commodity ID: 9949062115998679041

    Total air filter GS-B1 type

    Air Master Filter Cartridge GS-B1 Series
     
     
    GS-B1 series air filter cartridge is made of fiber filter paper or reinforced glass fiber folded into a cartridge, which has the advantages of large filter surface area, small differential pressure, large flow rate and long life. It is the best choice to replace the traditional cotton activated carbon filter, and is a novel energy-saving product suitable for removing particles and dust impurities in dry and oil-free air pressure systems, which can effectively protect the downstream filter and extend the service life of the whole filtration system. Shanghai Filter Co., Ltd. is the first to develop a total air filter cartridge in China, which has brought new changes to the domestic antibiotic and amino acid fermentation industry in terms of energy saving and emission reduction, and has created good social benefits.
     
    ♦ Materials and technical parameters
    Filter material Fiber filter paper, glass fiber reinforced filter media
    Support layer/infusion layer Polypropylene mesh wire
    Housing/inner support/end caps Galvanized sheet or stainless steel
    Seals Nitrile rubber
    Sealing Technology Polyurethane-based adhesive bonding
    Filtration accuracy 0.5µm、0.3µm
    Filtration efficiency 95%
    Initial pressure drop ≤0.005MPa
    Maximum working temperature <80℃
     
     
    Main Features

    High flux, low dropout

    Long life, high temperature resistance, anti-aging

    In-line disinfection available (but not recommended)

     

     

    GS-B1
    ♦ Technical parameters
     
    Filter media specifications Filtration flux (Nm3 /min) Filter surface area (m²) Cartridge Specifications Filtration flux (Nm3 /min) Filter surface area (m²)
    Φ150×330 3 1.7 Φ350×670 80 15
    Φ150×500 5 2.5 Φ350×1000 100 18.3
    Φ180×500 10 3.5 Φ420×830 120 23.9
    Φ210×500 15 5.3 Φ420×1000 150 29
    Φ210×670 20 7 Φ420×1200 180 33
    Φ250×670 30 7.5 Φ500×1000 200 35
    Φ300×670 50 10 Φ500×1200 250 40
    Φ350×670 60 12 Φ580×1200 300 48
    Note: Our company continues to produce the same specification GS-B2 pre-filtered large area cartridge for old users, and the first three cartridges in the above table are with Φ9 center hole.
    ♦ Ordering Information

     

    GS-B1

    Materials Support skeleton Cartridge Size

    Fiber filter paper

    Glass fiber filter media

    Galvanized sheet/stainless steel

    Cartridge diameter/cartridge height (mm)

    Example Φ350×1000

     

  • GS-B1 type single core air master filter

    The air total filter shell is designed, manufactured, inspected and accepted in accordance with GB 150-2011 "Steel Pressure Vessel", and the equipment is processed in accordance with JB/T 4709-2000 "Steel Pressure Vessel Welding Regulations" and JB/T 4730-2005 "Nondestructive Testing of Pressurized Equipment", and the flange standard is HG/T 20592-2009 B series.

    GS-B1 single-core air filter is suitable for one-to-one form, with the inlet and outlet in the same horizontal line and the best air flow design, which has the advantages of reduced pressure and easy installation and replacement of filter elements. The top and bottom of the cartridge are connected by flanges, and the inner surface of the housing is mechanically polished. The shell is made of 304 stainless steel, and the conventional working pressure is 0.4MPa, other working pressure shells and pressure vessel qualification certificates are also available.

     
    空气总过滤器GS-B1型
    ♦ GS-B1 type single core air master filter model specification and external dimension table
     
    Product Model Cartridge configuration

    Filtration capacity

    (Nm3/min)

    D d L h H
    GS-B1-3 Φ150×330 3 186 DN40PN16 320 300 824
    GS-B1-5 Φ150×500 5 186 DN50PN16 320 300 994
    GS-B1-10 Φ180×500 10 219 DN65PN16 360 300 1048
    GS-B1-15 Φ210×500 15 256 DN80PN16 400 320 1300
    GS-B1-20 Φ210×670 20 256 DN100PN16 400 320 1317
    GS-B1-30 Φ250×670 30 306 DN100PN16 476 350 1446
    GS-B1-50 Φ300×670 50 356 DN125PN16 560 440 1460
    GS-B1-60 Φ350×670 60 406 DN125PN16 600 440 1446
    GS-B1-80 Φ350×830 80 406 DN150PN16 600 440 1644
    GS-B1-100 Φ350×1000 100 406 DN150PN16 600 440 1824
    GS-B1-120 Φ420×830 120 506 DN200PN16 700 440 1824
    GS-B1-150 Φ420×1000 150 506 DN200PN16 700 500 1994
    GS-B1-180 Φ420×1200 180 506 DN200PN16 700 500 2200
    GS-B1-200 Φ500×1000 200 606 DN250PN16 860 600 2100
    GS-B1-250 Φ500×1200 250 656 DN300PN16 920 650 2425
    GS-B1-300 Φ580×1200 300 756 DN350PN16 1040 700 2530
     
    GS-B1 type multi-cell air master filter
    GS-B1 multi-cell air filter is suitable for large air volume filtration, and the air is generally fed from the bottom to the top. 4 cores or less are connected by flange and used to replace the cartridge, and 5 cores or more can be opened at the top or side to facilitate the replacement of the cartridge. Below the cartridge can be filled with oil-absorbing felt, glass wool and stainless steel wire mesh to remove oil and water as well as rust and dust in the air. The shell is generally made of 304 stainless steel (316L material can also be selected according to customer requirements), and the conventional working pressure is ≤0.3MPa, and other working pressure shells and pressure vessel qualification certificates are also available.
    空气总过滤器GS-B1型
     
    ♦ GS-B1 type multi-cell air master filter selection and external dimension table
     
    Product Model Number of cartridges D(㎜) d Reference flow rate (Nm3/min)
    GS-B1-300 3芯Φ350×1000 Φ1000 DN250PN10 210~300
    GS-B1-400 4芯Φ350×1000 Φ1200 DN300PN10 280~400
    GS-B1-500 5芯Φ350×1000 Φ1400 DN350PN10 350~500
    GS-B1-700 7芯Φ350×1000 Φ1600 DN400PN10 490~700
    GS-B1-900 9芯Φ350×1000 Φ1800 DN450PN10 630~900
    GS-B1-1200 12芯Φ350×1000 Φ2000 DN550PN10 840~1200
    GS-B1-1500 15芯Φ350×1000 Φ2200 DN600PN10 1050~1500
    GS-B1-1900 19芯Φ350×1000 Φ2400 DN650PN10 1330 ~1900
    GS-B1-2200 22芯Φ350×1000 Φ2600 DN750PN10 1540~2200
    GS-B1-2700 27芯Φ350×1000 Φ2800 DN800PN10 1890~2700

    Note: 1. Specially designed and processed according to user requirements.

              2. The reference flow rate is calculated according to the inlet pressure 0.2MPa (gauge pressure) and differential pressure 0.01MPa.

  • Fermentation compressed air filtration system (I)

     

    Air compressor picking filter GS-A type

    This series is used for air compressor inlet filtration

     

    Air Master Filter GS-B1

    The cartridge is made of folded fiber filter paper or reinforced glass fiber, which has the advantages of large filtration area, small differential pressure, large flow rate and long life.

     

    Air pre-filter GS-B2

    Made of ultra-fine glass fiber material with 0.3µm filtration accuracy and up to 95% dust holding space.

     

    Steam filter GS-Z

    GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters.

     

    Air Fine Filter GS-PTFE

    Made of natural strong hydrophobic PTFE membrane and borosilicate microfiber compounded by a special process (Invention Patent No. 03129430.8, 200510024216.2)

     

     

     

     

     

    img

Case air total filter GS-B1 type


Total air filter GS-B1 type

Category:

Total air filter GS-B1 type


  • Cartridge
  • Housing
  • Design and selection instructions
  • 产品链接
    • Commodity name: Case air total filter GS-B1 type
    • Commodity ID: 9949062115998679041

    Total air filter GS-B1 type

    Air Master Filter Cartridge GS-B1 Series
     
     
    GS-B1 series air filter cartridge is made of fiber filter paper or reinforced glass fiber folded into a cartridge, which has the advantages of large filter surface area, small differential pressure, large flow rate and long life. It is the best choice to replace the traditional cotton activated carbon filter, and is a novel energy-saving product suitable for removing particles and dust impurities in dry and oil-free air pressure systems, which can effectively protect the downstream filter and extend the service life of the whole filtration system. Shanghai Filter Co., Ltd. is the first to develop a total air filter cartridge in China, which has brought new changes to the domestic antibiotic and amino acid fermentation industry in terms of energy saving and emission reduction, and has created good social benefits.
     
    ♦ Materials and technical parameters
    Filter material Fiber filter paper, glass fiber reinforced filter media
    Support layer/infusion layer Polypropylene mesh wire
    Housing/inner support/end caps Galvanized sheet or stainless steel
    Seals Nitrile rubber
    Sealing Technology Polyurethane-based adhesive bonding
    Filtration accuracy 0.5µm、0.3µm
    Filtration efficiency 95%
    Initial pressure drop ≤0.005MPa
    Maximum working temperature <80℃
     
     
    Main Features

    High flux, low dropout

    Long life, high temperature resistance, anti-aging

    In-line disinfection available (but not recommended)

     

     

    GS-B1
    ♦ Technical parameters
     
    Filter media specifications Filtration flux (Nm3 /min) Filter surface area (m²) Cartridge Specifications Filtration flux (Nm3 /min) Filter surface area (m²)
    Φ150×330 3 1.7 Φ350×670 80 15
    Φ150×500 5 2.5 Φ350×1000 100 18.3
    Φ180×500 10 3.5 Φ420×830 120 23.9
    Φ210×500 15 5.3 Φ420×1000 150 29
    Φ210×670 20 7 Φ420×1200 180 33
    Φ250×670 30 7.5 Φ500×1000 200 35
    Φ300×670 50 10 Φ500×1200 250 40
    Φ350×670 60 12 Φ580×1200 300 48
    Note: Our company continues to produce the same specification GS-B2 pre-filtered large area cartridge for old users, and the first three cartridges in the above table are with Φ9 center hole.
    ♦ Ordering Information

     

    GS-B1

    Materials Support skeleton Cartridge Size

    Fiber filter paper

    Glass fiber filter media

    Galvanized sheet/stainless steel

    Cartridge diameter/cartridge height (mm)

    Example Φ350×1000

     

  • GS-B1 type single core air master filter

    The air total filter shell is designed, manufactured, inspected and accepted in accordance with GB 150-2011 "Steel Pressure Vessel", and the equipment is processed in accordance with JB/T 4709-2000 "Steel Pressure Vessel Welding Regulations" and JB/T 4730-2005 "Nondestructive Testing of Pressurized Equipment", and the flange standard is HG/T 20592-2009 B series.

    GS-B1 single-core air filter is suitable for one-to-one form, with the inlet and outlet in the same horizontal line and the best air flow design, which has the advantages of reduced pressure and easy installation and replacement of filter elements. The top and bottom of the cartridge are connected by flanges, and the inner surface of the housing is mechanically polished. The shell is made of 304 stainless steel, and the conventional working pressure is 0.4MPa, other working pressure shells and pressure vessel qualification certificates are also available.

     
    空气总过滤器GS-B1型
    ♦ GS-B1 type single core air master filter model specification and external dimension table
     
    Product Model Cartridge configuration

    Filtration capacity

    (Nm3/min)

    D d L h H
    GS-B1-3 Φ150×330 3 186 DN40PN16 320 300 824
    GS-B1-5 Φ150×500 5 186 DN50PN16 320 300 994
    GS-B1-10 Φ180×500 10 219 DN65PN16 360 300 1048
    GS-B1-15 Φ210×500 15 256 DN80PN16 400 320 1300
    GS-B1-20 Φ210×670 20 256 DN100PN16 400 320 1317
    GS-B1-30 Φ250×670 30 306 DN100PN16 476 350 1446
    GS-B1-50 Φ300×670 50 356 DN125PN16 560 440 1460
    GS-B1-60 Φ350×670 60 406 DN125PN16 600 440 1446
    GS-B1-80 Φ350×830 80 406 DN150PN16 600 440 1644
    GS-B1-100 Φ350×1000 100 406 DN150PN16 600 440 1824
    GS-B1-120 Φ420×830 120 506 DN200PN16 700 440 1824
    GS-B1-150 Φ420×1000 150 506 DN200PN16 700 500 1994
    GS-B1-180 Φ420×1200 180 506 DN200PN16 700 500 2200
    GS-B1-200 Φ500×1000 200 606 DN250PN16 860 600 2100
    GS-B1-250 Φ500×1200 250 656 DN300PN16 920 650 2425
    GS-B1-300 Φ580×1200 300 756 DN350PN16 1040 700 2530
     
    GS-B1 type multi-cell air master filter
    GS-B1 multi-cell air filter is suitable for large air volume filtration, and the air is generally fed from the bottom to the top. 4 cores or less are connected by flange and used to replace the cartridge, and 5 cores or more can be opened at the top or side to facilitate the replacement of the cartridge. Below the cartridge can be filled with oil-absorbing felt, glass wool and stainless steel wire mesh to remove oil and water as well as rust and dust in the air. The shell is generally made of 304 stainless steel (316L material can also be selected according to customer requirements), and the conventional working pressure is ≤0.3MPa, and other working pressure shells and pressure vessel qualification certificates are also available.
    空气总过滤器GS-B1型
     
    ♦ GS-B1 type multi-cell air master filter selection and external dimension table
     
    Product Model Number of cartridges D(㎜) d Reference flow rate (Nm3/min)
    GS-B1-300 3芯Φ350×1000 Φ1000 DN250PN10 210~300
    GS-B1-400 4芯Φ350×1000 Φ1200 DN300PN10 280~400
    GS-B1-500 5芯Φ350×1000 Φ1400 DN350PN10 350~500
    GS-B1-700 7芯Φ350×1000 Φ1600 DN400PN10 490~700
    GS-B1-900 9芯Φ350×1000 Φ1800 DN450PN10 630~900
    GS-B1-1200 12芯Φ350×1000 Φ2000 DN550PN10 840~1200
    GS-B1-1500 15芯Φ350×1000 Φ2200 DN600PN10 1050~1500
    GS-B1-1900 19芯Φ350×1000 Φ2400 DN650PN10 1330 ~1900
    GS-B1-2200 22芯Φ350×1000 Φ2600 DN750PN10 1540~2200
    GS-B1-2700 27芯Φ350×1000 Φ2800 DN800PN10 1890~2700

    Note: 1. Specially designed and processed according to user requirements.

              2. The reference flow rate is calculated according to the inlet pressure 0.2MPa (gauge pressure) and differential pressure 0.01MPa.

  • Fermentation compressed air filtration system (I)

     

    Air compressor picking filter GS-A type

    This series is used for air compressor inlet filtration

     

    Air Master Filter GS-B1

    The cartridge is made of folded fiber filter paper or reinforced glass fiber, which has the advantages of large filtration area, small differential pressure, large flow rate and long life.

     

    Air pre-filter GS-B2

    Made of ultra-fine glass fiber material with 0.3µm filtration accuracy and up to 95% dust holding space.

     

    Steam filter GS-Z

    GS-Z, GS-Ti and GS-BG series steam filters are mainly used for online steam sterilization matching filtration of air sterilization filters.

     

    Air Fine Filter GS-PTFE

    Made of natural strong hydrophobic PTFE membrane and borosilicate microfiber compounded by a special process (Invention Patent No. 03129430.8, 200510024216.2)

     

     

     

     

     

    img